
Fuel Manager Replacement Element 31863 - 30 Micron 3.6" nominal length - Fuel Water Separator
Fuel Manager
Make 4x interest-free
payments of
$10.50 AUD
fortnightly
MORE INFO
Spend up to $1000.
Weekly, Fortnightly
or Monthly Repayments
MORE INFO
- SKU:
- 31863
- Condition:
- New
- Weight:
- 0.40 KGS
- Shipping:
- Calculated at Checkout
Fuel Manager 31863 Replacement Element 30 Micron FM100 Series
Suits FM100 Series Filter Kits
30 Micron Pre-Filter/Water Separator Element
Using chemically treated paper media to repel water, these elements offer very efficient primary filtration. Designed to be used with a Final Filter, a Pre-Filter will extend service intervals and ensure optimum protection for the injection system. Available in standard or extended duty sizes.
Direct Equivalent: Badwin BF7783-D
31863 Features:
• Max fuel flow (inc. return flow) 300 Litres/hour
• Particulate Filter Efficiency up to 99% @ 2 microns (TR13353)
• Water Separation Up to 98% efficiency
• Length: 91mm
* Filter comes with drain tap as pictured (to fit bowl, remove drain tap).
What is Fuel Manager ?
Stanadyne has been making diesel fuel filters for over 30 years. Stanadyne’s “Square Filter” design filters, with glass or metal cases, are still seen on many off and on-road applications. But new technology and requirements from the market have resulted in a new generation of diesel fuel filters known as Fuel Manager.
Fuel Manager 100 Series
For engines with a total fuel flow of up to 80 US galls (300 liters)/hour, or about 350 HP. The filter elements interface with the header using a patented "Key Track" system, which, like the FM 10 Series, is designed to ensure that only the correct, genuine service element can be installed on the header. Up to 350HP.
Standard threads for FM 100 Series are: ¼” – 18 NPTF; 3/8” – 18 NPTF; ½” – 20 SAE ‘O’ ring; M12 x 1.5 ‘O’ ring; & M14 x 1.5’O’ ring.
Read Fuel Manager User Guide >
Fuel Manager is a diesel fuel filter/water separator system. It features a complete range of modules and features to meet any diesel filtration need. The concept is to provide everything you need, but only what you need, using a common range of interchangeable parts that can be added as needed to the basic header to provide specific features to meet specific requirements. A Fuel Manager basic assembly consists of a cast aluminum header with two inlet and two outlet female hreaded ports for fuel line connections. Normally, only one inlet and one outlet are required. (The flexible design offers a choice. Unused ports should be plugged). Attached to the header is the element, which contains the media to remove water & other contaminants.
This product hasn't received any reviews yet. Be the first to review this product!
3 Customer Reviews Hide Reviews Show Reviews
-
Replacement filter
Awesome been using since new and love the service from western filters
-
Replacement fuel filter canister
I have fitted both the Fuel Manger and a Catch Can since my vehicle was purchase in June 2019 and have purchase replacement filters for both items and both work as described
I am planning many long trips and have purchased extra spares and service delivery times was excellent and anyone thinking of purchasing from Western Filters you cant go wrong and will be happy as I am with the items, service and reliable products -
Parts service
Great service. Prompt delivery
Mann
Oil Drain Kit for ProVent 200 OS-DRAIN-KIT
Oil Drain Kit to suit ProVent 200 Catchcan Make's a neat job of your ProVent and easy to drain for that professional look !Comes with 1 metre of clear hose, 2 x Hose clamps , Drain cock and fitting...
Western Filters
OS-PROV-01 Mann ProVent Oil Catch Can Kit for Toyota Hilux N70 2008-15 3.0L D4D KUN16 KUN26 with ABS - Vehicle Specific
ProVent 200 Oil Catch Can Kit suits:Toyota Hilux 3.0L 2008-2015Turbo Diesel D4D KUN16 KUN26Autos and manuals *** All of our kits are made to suit RIGHT-HAND DRIVE vehicles, they may suit some left...
Western Filters
Universal Mann ProVent 1/2" Catch Can Kit for Crank Case 12mm (1/2") Outlet (incl. Nissan Navara / Patrol 2.8L 3.0L ZD30) OS-PROV-09
Universal Mann ProVent 12mm (1/2") Oil Catch Can Kit suits: ANY vehicle with 12mm (1/2) Crank Case Outlet Including: Nissan Navara & Patrol 2.8L 3.0LThe Half Inch Installation Kit is generally to...
Western Filters
Mitsubishi Triton 2006-15 ML MN 2.5L Challenger 4D56 - ProVent Catch Can Vehicle Specific Kit OS-PROV-05-4WD
MANN ProVent 200 Kit OS-PROV-05-4WD suits:Mitsubishi Triton 2006-2015 ML MN / Challenger2.5L DI-D 4D56 Common Rail** ONLY 4WD 130 kWMANN+HUMMEL ProVent Catch Can's separate oil from the air intake...
Mann
16mm (5/8”) Plastic Straight Hose Fitting HJ58 - Great for ProVent installs 28604
16mm (5/8”) Plastic Straight Hose Fitting HJ58Plastic pipe fittings (incl. bends, reducers and straight pipes) are used to join pipes together, or for the installation of components that allow...
Mixed Brands
OS-PFMPB25 1" (25mm) I.D Oil & Fuel Resistant Hose (Low Pressure)
Oil & Fuel Resistant Hose 25mm / 1" I.D.Great for use with our Provent 200 Crankcase breathers. This hose is to be used in Low Pressure applications only ! This is a 1 metre Length. If you...
Fuel Manager
Fuel Manager 36693 Spare Replacement Element - 2 Micron 2.8" Nominal Length - Fuel Water Separator
Fuel Manager 36693 Spare Element 2 Micron 2.8" Nominal LengthFM100 Series Fuel Water Separator Filter Kits2 or 5 Micron Final Filter/Water Separator ElementProviding the ultimate in protection, a...
Western Filters
Ford Ranger PX2 PX3 3.2L 2015-on TDCi Turbo Diesel 5Cyl P5AT DI DOHC - ProVent Oil Catch Can Filter Kit OS-PROV-15
MANN+HUMMEL ProVent 200 Catch Can suits:Ford Ranger PX2 PX3 3.2L (2015-on) Turbo Diesel TDCi 5Cyl P5AT DI DOHC Crankcase Breather** This kit WILL NOT FIT 2.2L models **Advantages of MANN+HUMMEL...
Western Filters
Toyota Hilux Fortuner N80 1GD-FTV GUN-126R EGR 2015-on 2.4L 2.8L - ProVent Oil Catch Can Vehicle Specific Kit OS-PROV-12
MANN+HUMMEL ProVent 200 Catch Can suits:Toyota Hilux N80 Series and Fortuner (sept.2015 on) 2.4L & 2.8L Diesel Models With GUN-126R EGR Eng. 1GD-FTV 2GD-FTVAdvantages of MANN+Hummel ProVent Catch...
Western Filters
Mitsubishi Pajero NM NX 4M41 3.2L DID 2006-2015 - ProVent Oil Catch Can Vehicle Specific Kit OS-PROV-08
ProVent 200 Oil Catch Can Kit suits: Mitsubishi Pajero 3.2L D-ID NM NX 4M41 2006-2015*** Note: This kit won't fit if the vehicle is fitted with a TJM/Airtech snorkel, but does fit if a Safari...
Mann
Oil Resistant Hose (Low Pressure) for ProVent (1mtr x 3/4" x 19mm) OS-PFPOH19
Oil Resistant Hose PFPOH19 (Low Pressure) for:MANN ProVent (1mtr x 3/4" x 19mm)PFPOH19 - 19mm or 3/4" I.D oil resistant hose, Great for use with the MANN ProVent Catch Can for Crankcase Breathers !...
Western Filters
Isuzu D-MAX MU-X (feb2017-aug2020) 3.0L Turbo Diesel 4Cyl. 130kW DOHC 16-valve DPD 4JJ1-TCX - ProVent 200 Catch Can OS-PROV-25
MANN+HUMMEL ProVent 200 Catch Can suits:Isuzu D-MAX feb2017-aug2020 3.0L Turbo Diesel 4Cyl. 130kW DOHC 16-valve DPD 4JJ1-TDXIsuzu MU-X 2017 3.0L Turbo Diesel 4Cyl. 130kW DOHC 16-valve DPD...
Australia Wide Delivery Service
For special requirements, please contact us before ordering.
All goods are shipped within 2 business days of receipt of your order. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page. When you place an order, you will receive a Tracking Code and an estimate of the delivery date for you, based on the availability of your items and the shipping options you choose. We can only offer an approximate delivery date however, our experience has shown that most shipments arrive at their destination within 2 to 7 days.
Registration and Insurance
All orders sent to Australian addresses are shipped via Registered Post, which includes Insurance cover to A$100. It is extremely rare that our shipments are lost or damaged in transit. All efforts are made by Western Filters to ensure that your goods arrive safely and in a timely manner. However, we cannot be held responsible for Uninsured goods lost or damaged in transit.
Returns
We accept the return of goods which have arrived damaged or are nolonger required, aslong as returned within 30 DAYS FROM THE DATE OF PURCHASE, on presentation of the purchasing invoice / receipt. Please let us know if you have misplaced or lost your receipt and we will confirm your purchase via your proof of I.d and by our records.
Exclusions:
A refund, replacement, or repair won't be offered or accepted if the purchaser has modified or damaged the product, or have misused the product contrary to mannufacturer's or Western Filter's guidelines.
For exchange, credit, refund or repair we'll require business / personal information and signature in addition to your receipt. All purchases made on a debit/credit card will be credited back to the original card used. We also accept the return of goods where we have sent the incorrect product at no additional cost or if the product has been wrongly described.
For a successful return of an unwanted product the goods MUST BE; (a) UNUSED, (b) Undamaged and (c) REWRAPPED IN ORIGINAL PACKAGING. For the successful return of a faulty or damaged item; (a) contact us via email or phone (b) repackage and await shipping instructions.
Returns Shipping Costs:
While we do ship worldwide, there are certain restrictions and conditions on some products, such as weight, shipping rates and destinations. Please contact us via email or phone for specific information. NOTE: Shipping rates for most items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded off to the next full pound. We are currently using a Flate Rate for all orders.
Contact Details for Returning Purchases:
45 Forge Street, Blacktown NSW 2148
Hours: 7:00am - 5:00pm (Monday to Friday) / 7:00am - 12:00pm (Saturday)
Email: jason@westernfilters.com.au / Phone: +61 (02) 9831 1715
In Person: please contact us and then return the item with the purchasing receipt.
Post / Courier: please contact us before shipping.