Mann-Filter
MANN+HUMMEL Replacement Element LC 5001/2X for ProVent 200 IV [Element ONLY]
Make 4x interest-free
payments of
$22.00 AUD
fortnightly
MORE INFO
Spend up to $1000.
Weekly, Fortnightly
or Monthly Repayments
MORE INFO
- SKU:
- LC5001/2X
- Condition:
- New
- Weight:
- 0.14 KGS
- Shipping:
- Calculated at Checkout
- fbt-product:
- /mann-replacement-inner-conversion-cap-for-provent-200-iv-lid-inner-cap-only/
MANN+HUMMEL LC 5001/2X Replacement Element – Fits ProVent 200 IV | Genuine Filter Element
*** Element ONLY ! NOT the COMPLETE unit ***
*** LC5001/2X Supersedes LC5001/1X ***
*** This element suits all PROVENT 200 units
*** If You Have the Spring / Valve on Inside of Provent 200 Lid
- the Conversion Cap is Required,
Purchase Part Number 317192S01
Maintain peak performance from your ProVent 200 or ProVent 200 IV system with the genuine MANN+HUMMEL LC 5001/2X Replacement Filter Element. This OEM-quality element effectively separates oil mist and blow-by gases, protecting your engine’s intake system and maintaining proper crankcase ventilation.
Whether performing routine service or replacing a saturated filter, the LC 5001/2X ensures reliable, long-lasting filtration
Key Benefits
- Genuine MANN+HUMMEL component
- Improves crankcase ventilation efficiency
- Reduces oil contamination entering the turbo and intake
- Helps extend engine life by limiting carbon build-up
- Simple, direct replacement for compatible ProVent units
- Durable, high-efficiency synthetic filter media
Compatibility
✔ Suitable for:
- ProVent 200 (earlier models)
- ProVent 200 IV
Important Fitment Note:
Some earlier ProVent 200 housings include a relief spring built into the top cap. If your unit has this relief spring, you will also need to order:
➡ Replacement Top Cap – Part Number: 317192S01
This ensures correct fitment and proper sealing when using the LC 5001/2X element.
If you're unsure whether your cap has the relief spring, we can help identify it—simply contact us with a photo of your existing ProVent cap.
Specifications
Specification | Details |
| Brand | MANN+HUMMEL |
| Part Number / SKU | LC 5001/2X |
| Fits | ProVent 200 (all earlier versions), ProVent 200 IV |
| Filter Media | High-efficiency synthetic element |
| Function | Oil mist / blow-by gas separation |
Installation & Service Notes
- Open the ProVent housing, remove the old element, and insert the new LC 5001/2X.
- Ensure sealing surfaces are properly aligned.
- If your earlier ProVent 200 has a relief-spring cap, replace it with 317192S01 at the same time.
- Typical replacement interval: 20,000–40,000 km, depending on operating conditions.
Why Choose Genuine MANN+HUMMEL Filters?
OEM filters provide the best sealing integrity, highest oil-mist separation efficiency, and longest service life compared to generic alternatives. Designed specifically for crankcase ventilation systems, they maintain consistent performance throughout their service interval.
Frequently Asked Questions
Q: Does this element fit both ProVent 200 and ProVent 200 IV?
A: Yes — the LC 5001/2X fits both units. However, some early ProVent 200 models with a relief-spring top cap require the updated cap (317192S01) for correct installation.
Q: How do I know if I have the relief-spring cap?
A: Remove the top cover and check for a spring mechanism beneath it. If present, order the updated cap.
Q: Is this filter reusable?
A: No — it is a single-use disposable filter element.
Q: How often should I replace the filter?
A: Typically every 20,000–40,000 km, or sooner in heavy-duty conditions.
Australian Stock & Fast Delivery
All items ship quickly from our Australian warehouse. Trade enquiries and bulk orders welcome.
Please Note: We are based in Australia.
For International Customers, please email us for a Freight Quote.
Online Sales: jason@westernfilters.com.au
If unsure of the part's Vehicle Application & Fitment:
Use our Parts Finder on the Find My Vehicle page or do a REGO Search
Click this LINK: Find My Vehicle/ REGO Search
-
MANN+HUMMEL Replacement Element LC 5001/2Xfor Pro Vent200
This is my first Replacement Element after 55,000 Ks
-
Top product
Easy to change came with new rubber and cap that i was not expecting well done , also came fast via post
-
Provent Replacement Element
I have had a Provent 200 fitted to my 2011 VW Transporter with the CFCA Biturbo 2L engine since 2015. I replaced the original filter with a non genuine one early this year as I thought the genuine one to be a bit expensive. This replacement worked very well and the return hose was completely free of any oil. HOWEVER, after a little while the engine oil seemed to be disappearing and the inlet tract downstream of the turbos was showing oil everywhere. By some testing at the oil filler cap, it seemed that the engine had a certain amount of crankcase pressure. I placed two fittings in the Provent pipework to measure the differential pressure across the filter and found that it had 1psi on a large scale gauge. This doesn't sound much but on replacing the original cleaned filter the DP was zero. I have since replaced this with a new genuine filter that came with the vent valve upgrade kit that was easy to deal with. The DP of this filter is also zero. Early signs are that the oil consumption is settling down but a bit more time and testing is required and then I will have to clean out all of the inlet tract, especially the intercooler where it tends to pool as the low spot in the system. Fortunately it is fairly easy to remove. Due to the engine generally running well and only having 78K on it, it's hard to imagine there is much else wrong with it. The Moral of the tale---stay with the original replacement.
Australia Wide Delivery Service
For special requirements, please contact us before ordering.
All goods are shipped within 2 business days of receipt of your order. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page. When you place an order, you will receive a Tracking Code and an estimate of the delivery date for you, based on the availability of your items and the shipping options you choose. We can only offer an approximate delivery date however, our experience has shown that most shipments arrive at their destination within 2 to 7 days.
Registration and Insurance
All orders sent to Australian addresses are shipped via Registered Post, which includes Insurance cover to A$100. It is extremely rare that our shipments are lost or damaged in transit. All efforts are made by Western Filters to ensure that your goods arrive safely and in a timely manner. However, we cannot be held responsible for Uninsured goods lost or damaged in transit.
Returns & Exchanges – 30-Day Policy
We want you to be happy with your purchase. You may return or exchange goods for any reason – whether they arrived damaged or are no longer required – within 30 days from the date of purchase.
Conditions
:: Items must be brand new, unused, and in their original packaging, with all tags and labels attached.
:: A purchase invoice or receipt is required for all returns or exchanges.
:: If you have misplaced your receipt, please let us know. We can confirm your purchase using your proof of ID and our sales records.
Exclusions:
A refund, replacement, or repair won't be offered or accepted if the purchaser has modified or damaged the product, or have misused the product contrary to mannufacturer's or Western Filter's guidelines.
For exchange, credit, refund or repair we'll require business / personal information and signature in addition to your receipt. All purchases made on a debit/credit card will be credited back to the original card used. We also accept the return of goods where we have sent the incorrect product at no additional cost or if the product has been wrongly described.
For a successful return of an unwanted product the goods MUST BE; (a) UNUSED, (b) Undamaged and (c) REWRAPPED IN ORIGINAL PACKAGING. For the successful return of a faulty or damaged item; (a) contact us via email or phone (b) repackage and await shipping instructions.
Returns Shipping Costs:
While we do ship worldwide, there are certain restrictions and conditions on some products, such as weight, shipping rates and destinations. Please contact us via email or phone for specific information. NOTE: Shipping rates for most items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded off to the next full pound. We are currently using a Flate Rate for all orders.
Contact Details for Returning Purchases:
45 Forge Street, Blacktown NSW 2148
Hours: 7:30am - 5:00pm (Monday to Friday) / 7:30am - 12:00pm (Saturday)
Email: jason@westernfilters.com.au / Phone: +61 (02) 9831 1715
In Person: please contact us and then return the item with the purchasing receipt.
Post / Courier: please contact us before shipping.
0.00 AUD