Fuel Manager 36693 Spare Replacement Element - 2 Micron 2.8" Nominal Length - Fuel Water Separator
Make 4x interest-free
$12.00 AUD fortnightly
Spend up to $1000.
or Monthly Repayments
- 0.40 KGS
- Calculated at Checkout
Fuel Manager 36693 Spare Element
2 Micron 2.8" Nominal Length
FM100 Series Fuel Water Separator Filter Kits
2 or 5 Micron Final Filter/Water Separator Element
Providing the ultimate in protection, a Final (or secondary) Filter can be used on its own or in combination with either a 150 micron or 30 micron Pre-Filter assembly for maximum service life. Final Filter elements are available in a range of sizes for different service interval requirements.
• Max fuel flow (inc. return flow) 300 Litres/hour
• Particulate Filter Efficiency up to 99% @ 2 microns (TR13353)
• Water Separation Up to 98% efficiency
* Filter comes with drain tap as pictured (to fit bowl, remove drain tap).
What is Fuel Manager ?
Stanadyne has been making diesel fuel filters for over 30 years. Stanadyne’s “Square Filter” design filters, with glass or metal cases, are still seen on many off and on-road applications. But new technology and requirements from the market have resulted in a new generation of diesel fuel filters known as Fuel Manager.
Fuel Manager 100 Series
For engines with a total fuel flow of up to 80 US galls (300 liters)/hour, or about 350 HP. The filter elements interface with the header using a patented "Key Track" system, which, like the FM 10 Series, is designed to ensure that only the correct, genuine service element can be installed on the header. Up to 350HP.
Standard threads for FM 100 Series are:
¼” – 18 NPTF; 3/8” – 18 NPTF; ½” – 20 SAE ‘O’ ring; M12 x 1.5 ‘O’ ring; & M14 x 1.5’O’ ring.
Read Fuel Manager User Guide >
Fuel Manager is a diesel fuel filter/water separator system. It features a complete range of modules and features to meet any diesel filtration need. The concept is to provide everything you need, but only what you need, using a common range of interchangeable parts that can be added as needed to the basic header to provide specific features to meet specific requirements. A Fuel Manager basic assembly consists of a cast aluminum header with two inlet and two outlet female hreaded ports for fuel line connections. Normally, only one inlet and one outlet are required. (The flexible design offers a choice. Unused ports should be plugged). Attached to the header is the element, which contains the media to remove water & other contaminants. The header features a choice of female threads for fuel line connections.
This product hasn't received any reviews yet. Be the first to review this product!
4 Customer Reviews Hide Reviews Show Reviews
Isuzu Dmax factory fitted filter warning light flashed on, so time to change fuel manager 2 micron secondary unit as well, ordered through Jon at Western Filters, ordered two units, one for now, one for Ron, under a week for del, to easy, great service guys & girls at Western
I just wouldn't be without this system travelling around Australia to give you peace of mind for protection of these very temperamental common rail diesel engines.
I've used fuel manager filters for a couple of years. They've worked well. I've seen videos of Donaldson filters where the filter has been spray painted and the paint has blown into the filter housing. These FM filters are clearly capped before being painted.
Although these are 2 micron filters, my earlier 30 micron filters allowed smaller particles through which were mostly caught by the OEM filter, but the injectors had to be replaced because of smaller particle contamination, hence the 2 micron installation.
Excellent product providing piece of mind in the event of receiving a dose of bad fuel.
Australia Wide Delivery Service
For special requirements, please contact us before ordering.
All goods are shipped within 2 business days of receipt of your order. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page. When you place an order, you will receive a Tracking Code and an estimate of the delivery date for you, based on the availability of your items and the shipping options you choose. We can only offer an approximate delivery date however, our experience has shown that most shipments arrive at their destination within 2 to 7 days.
Registration and Insurance
All orders sent to Australian addresses are shipped via Registered Post, which includes Insurance cover to A$100. It is extremely rare that our shipments are lost or damaged in transit. All efforts are made by Western Filters to ensure that your goods arrive safely and in a timely manner. However, we cannot be held responsible for Uninsured goods lost or damaged in transit.
We accept the return of goods which have arrived damaged or are nolonger required, aslong as returned within 30 DAYS FROM THE DATE OF PURCHASE, on presentation of the purchasing invoice / receipt. Please let us know if you have misplaced or lost your receipt and we will confirm your purchase via your proof of I.d and by our records.
Exclusions: A refund, replacement, or repair won't be offered or accepted if the purchaser has modified or damaged the product, or have misused the product contrary to mannufacturer's or Western Filter's guidelines.
For exchange, credit, refund or repair we'll require business / personal information and signature in addition to your receipt. All purchases made on a debit/credit card will be credited back to the original card used. We also accept the return of goods where we have sent the incorrect product at no additional cost or if the product has been wrongly described.
For a successful return of an unwanted product the goods MUST BE; (a) UNUSED, (b) Undamaged and (c) REWRAPPED IN ORIGINAL PACKAGING. For the successful return of a faulty or damaged item; (a) contact us via email or phone (b) repackage and await shipping instructions.
Returns Shipping Costs: While we do ship worldwide, there are certain restrictions and conditions on some products, such as weight, shipping rates and destinations. Please contact us via email or phone for specific information. NOTE: Shipping rates for most items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded off to the next full pound. We are currently using a Flate Rate for all orders.
Contact Details for Returning Purchases:
45 Forge Street, Blacktown NSW 2148
Hours: 7:00am - 5:00pm (Monday to Friday) / 7:00am - 12:00pm (Saturday)
Email: email@example.com / Phone: +61 (02) 9831 1715
In Person: please contact us and then return the item with the purchasing receipt.
Post / Courier: please contact us before shipping.